Device ID: Tap QR code and scan the QR code on top of your recorder using the camera on your mobile device.
OR
Under Device ID, manually enter the Device ID printed under the QR code.
|
Note
|
Make sure your recorder is turned on and connected to the network.
|
Password: If you have not completed initial setup through the recorder’s interface, enter the default system password and tap Save. See your recorder’s instruction manual for your system’s default password.
You will be asked to create a new, secure 8–15 character password. Enter your new password in the Change Password screen. Reconfirm your new password, and then press Done. This password will be used to connect to the system locally as well as through the Lorex Cirrus app from now on.
(OR) If initial setup is complete, enter the system’s password (your new, secure password created during initial recorder setup)
and tap Save. The app opens in Live View and streams video from your cameras.