4 Pairing Wire-Free Cameras
The wire-free camera and recorder have already been paired out of the box. If for some reason the pairing is lost, or if you
have purchased an accessory add-on camera, follow these steps to pair the camera and recorder using the Lorex Cirrus app. Your wire-free recorder and camera must be powered on during the pairing process.
Prerequisites:
-
Your wire-free camera must have a fully charged Power Pack inserted into the camera base to complete pairing. Refer to the
documentation included with your product for more information.
-
Keep your wire-free camera close to the recorder and do not mount the camera until after pairing is complete.
To pair the camera using the Lorex Cirrus app:
-
From live view, tap any free channel you would like to pair a camera to (marked with a
icon).
-
Tap Pair. A timer for 30 seconds appears.
-
Press and hold the pair button on the back of the wire-free camera for 3 seconds.
|
Note
|
A “pairing successful” message should appear on screen. If you do not see this message, repeat the steps above.
|