11 Motion Detection
In addition to general motion detection, the system supports smart Person/Vehicle detection. Both types of detection can be
configured using the menu shown below.
11.1 Configuring Motion Detection
Set preferences for motion detection on each channel, and select channels you want to enable smart Person/Vehicle detection
on.
|
CAUTION
|
A maximum of 4 channels will support Person/Vehicle detection at once. By default, channels 1-4 have Person/Vehicle detection
enabled.
|
11.2 Search for Person/Vehicle Detection Events
Search for Person/Vehicle detection on a specific channel or the entire system. You can also choose to back up events (USB
flash drive required - not included).
To search for Person/Vehicle detection events:
-
From the Live View display, right-click to open the Quick Menu, then click Main Menu.
-
Click ALARM. Click the SMART SEARCH tab on the side panel, then SMD on the top panel.
-
Select the channel to search for events from, or select All.
-
Choose a start and end time for your search.
-
Click Search. Events that match your search criteria appear below.
-
Click
in the Playback column to view the event. If you want to back up events, check the events you want to back up, then click Export.