LHA2000 Series
Front Matter
1 Important Safeguards
1.1 General Precautions
1.2 Installation
1.3 Service
1.4 Use
2 Package Contents
3 DVR Overview
3.1 Front Panel
3.2 Back Panel
4 Basic Setup
4.1 STEP 1: Connect the BNC cameras
4.2 STEP 2: Connect the mouse
4.3 STEP 3: Connect the Ethernet cable
4.4 STEP 4: Connect the monitor or TV
4.5 STEP 5: Connect to power
4.6 STEP 6: Upgrade firmware to latest version (if available)
4.7 STEP 7: Create a secure password
4.8 STEP 8: Complete the Setup Wizard
4.9 STEP 9: Verify camera image
4.9.1 Camera Installation Tips
4.10 Connecting to Your DVR Over the Internet
4.11 Quick Access to System Information
5 Using the Mouse
6 Using the Remote Control
7 Using the DVR’s On-Screen Display
7.1 Using the Taskbar
7.2 Using the Quick Menu
7.3 Using the Mini Menu
7.4 Using the On-Screen Keypads
7.5 Using PTZ Controls
7.5.1 Setting PTZ Presets
7.6 Using Digital Zoom
8 Recording
9 Playback
9.1 Using Playback
9.2 Video Playback Controls
9.3 Event Playback Controls
9.4 Picture Playback Controls
9.5 Smart Search Playback Controls
9.5.1 Using the Smart Search Menu
9.6 Using Digital Zoom
10 Search & Backup
10.1 Drive Menu Controls
10.2 Video Clip Backup
10.3 Event Search — Searching and Backing Up
10.4 Event Search — Quick Backup
10.5 Picture Search — Searching and Backing Up
10.6 Picture Search — Quick Backup
11 Managing Users, Passwords and Permissions
11.1 Changing Passwords
11.2 Adding a New User
11.3 Setting User Permissions
12 Using the Main Menu
12.1 Main Menu Overview
12.1.1 Copying Channel Settings to Another Channel
12.2 Settings Menu
12.2.1 Changing a Camera’s On-Screen Display (OSD)
12.2.2 Adjusting Camera Image Color
12.2.3 Setting up Covert Recording
12.2.4 Camera Type
12.2.5 Changing the DVR’s Output Resolution
12.2.6 Adjusting Menu Transparency
12.2.7 Configuring Sequence Mode
12.2.8 Configuring Privacy Zone(s)
12.2.9 Configuring Recording Parameters
12.2.10 Setting the Recording Schedule
12.2.11 Configuring System Recording Quality (Mainstream and Substream)
12.2.12 Configuring Auto Capture
12.2.13 Setting a Picture Schedule for Auto Capture
12.2.14 Enabling Manual Capture
12.2.15 Configuring Basic Network Settings
12.2.16 Setting up Email Notifications
12.2.17 Setting an Email Schedule
12.2.18 Configuring DDNS Settings
12.2.19 Configuring RTSP Streaming (Advanced)
12.2.20 Configuring Motion Detection Settings
12.3 Search Menu
12.3.1 Search for Video Recordings
12.3.2 Search for Events
12.3.3 Search for Snapshots
12.4 Device Menu
12.4.1 Configuring Hard Drive Overwrite
12.4.2 Formatting the Hard Drive
12.4.3 Setting Up Hard Drive Mirroring (Advanced)
12.4.4 Configuring Hard Drive Groups (Advanced)
12.4.5 Configuring PTZ Cameras
12.5 System Menu
12.5.1 Changing the Date and Time
12.5.2 Changing On-Screen Language
12.5.3 Configuring Menu Time-out Option
12.5.4 Changing Video Output — NTSC and PAL
12.5.5 Turning Front Panel LEDs ON/OFF
12.5.6 Configuring Daylight Savings Time (DST)
12.5.7 Configuring NTP
12.5.8 View System Information
12.5.9 View Channel Information
12.5.10 View Recording Information
12.5.11 Logs — Searching and Backing Up
12.5.12 Setting the Remote ID
12.6 Advanced Menu
12.6.1 Manual Firmware Upgrade
12.6.2 Restoring Default Settings
12.6.3 Exporting System Settings
12.6.4 Importing System Settings
12.6.5 Configuring System Warning Settings
12.6.6 Using Automatic Firmware Upgrade
13 FLIR Client 12 for PC / Mac
13.1 Minimum System Requirements
13.2 Installation
13.3 Logging In
13.4 FLIR Client 12 Live Viewing Overview
13.4.1 Channel List
13.4.2 Color Controls
13.4.3 PTZ Controls
13.5 Playback & Search
13.5.1 Search for Recordings
13.5.2 Playback Controls
13.5.3 Using Video Download
13.6 Remote Settings Menu — Configure DVR Settings with FLIR Client 12
13.6.1 Copying Channel Settings to Another Channel
13.6.2 Changing a Camera’s On-Screen Display (OSD)
13.6.3 Setting up Covert Recording
13.6.4 Configuring Privacy Zone(s)
13.6.5 Configuring Recording Parameters
13.6.6 Setting the Recording Schedule
13.6.7 Configuring System Recording Quality (Mainstream and Substream)
13.6.8 Configuring Auto Capture
13.6.9 Enabling/Disabling Manual Capture
13.6.10 Setting a Picture Schedule for Auto Capture
13.6.11 Configuring Basic Network Settings
13.6.12 Setting up Email Notifications
13.6.13 Setting an Email Schedule
13.6.14 Configuring DDNS Settings
13.6.15 Configuring RTSP Streaming (Advanced)
13.6.16 Configuring Motion Detection Settings
13.6.17 Configuring Hard Drive Overwrite
13.6.18 Configuring PTZ Cameras
13.6.19 Changing the Date and Time
13.6.20 Configuring Menu Time-out Option
13.6.21 Configuring Daylight Savings Time (DST)
13.6.22 Configuring NTP
13.6.23 Managing Users, Passwords and Permissions
13.6.24 View System Information
13.6.25 View Channel Information
13.6.26 View Recording Information
13.6.27 Setting the Remote ID
13.6.28 Manual Firmware Upgrade
13.6.29 Restoring Default Settings
13.6.30 Configuring System Event Settings
13.7 Local Settings Menu — Set Download Location and File Type
14 Connecting to Your System Using Smartphone or Tablet Apps
15 Viewing Backed Up Video on PC/Mac
15.1 Running Lorex Player 11
15.2 Lorex Player 11 Interface Overview
15.2.1 About the Advanced Menu
16 Hard Drive Installation
16.1 Removing the Hard Drive
16.2 Installing a Hard Drive
17 Connecting PTZ Cameras to the DVR
18 Recording Audio
18.1 STEP 1: Connecting a Self-Powered Microphone
18.2 STEP 2: Configuring Audio Recording
19 DDNS Setup (Advanced)
19.1 STEP 1: Port Forwarding
19.2 STEP 2: Create a LOREX Account
19.3 STEP 3: Add Your Address
19.4 STEP 4: Activate Your Warranty
19.5 STEP 5: Sign Up for a DDNS Account
19.6 STEP 6: Enable DDNS on the DVR
19.7 STEP 7: Connect to the DVR’s DDNS Address
20 Troubleshooting
21 LHA2000 Series Technical Specifications
21.1 System
21.2 Inputs/Outputs
21.3 Display
21.4 Recording
21.5 Playback and Backup
21.6 Storage & Archive
21.7 Connectivity
21.8 General
21.9 Recording Resolution (Pixels) & Maximum Speed (FPS — Frames per second)
22 Notices
22.1 FCC/IC
22.2 CE
22.3 Modification
22.4 RoHS
22.5 ICES-003
Document
Front Matter
1 Important Safeguards
2 Package Contents
3 DVR Overview
4 Basic Setup
5 Using the Mouse
6 Using the Remote Control
7 Using the DVR’s On-Screen Display
8 Recording
9 Playback
10 Search & Backup
11 Managing Users, Passwords and Permissions
12 Using the Main Menu
13 FLIR Client 12 for PC / Mac
14 Connecting to Your System Using Smartphone or Tablet Apps
15 Viewing Backed Up Video on PC/Mac
16 Hard Drive Installation
17 Connecting PTZ Cameras to the DVR
18 Recording Audio
19 DDNS Setup (Advanced)
20 Troubleshooting
21 LHA2000 Series Technical Specifications
22 Notices
Chapter
1.1 General Precautions
1.2 Installation
1.3 Service
1.4 Use
3.1 Front Panel
3.2 Back Panel
4.1 STEP 1: Connect the BNC cameras
4.2 STEP 2: Connect the mouse
4.3 STEP 3: Connect the Ethernet cable
4.4 STEP 4: Connect the monitor or TV
4.5 STEP 5: Connect to power
4.6 STEP 6: Upgrade firmware to latest version (if available)
4.7 STEP 7: Create a secure password
4.8 STEP 8: Complete the Setup Wizard
4.9 STEP 9: Verify camera image
4.10 Connecting to Your DVR Over the Internet
4.11 Quick Access to System Information
7.1 Using the Taskbar
7.2 Using the Quick Menu
7.3 Using the Mini Menu
7.4 Using the On-Screen Keypads
7.5 Using PTZ Controls
7.6 Using Digital Zoom
9.1 Using Playback
9.2 Video Playback Controls
9.3 Event Playback Controls
9.4 Picture Playback Controls
9.5 Smart Search Playback Controls
9.6 Using Digital Zoom
10.1 Drive Menu Controls
10.2 Video Clip Backup
10.3 Event Search — Searching and Backing Up
10.4 Event Search — Quick Backup
10.5 Picture Search — Searching and Backing Up
10.6 Picture Search — Quick Backup
11.1 Changing Passwords
11.2 Adding a New User
11.3 Setting User Permissions
12.1 Main Menu Overview
12.2 Settings Menu
12.3 Search Menu
12.4 Device Menu
12.5 System Menu
12.6 Advanced Menu
13.1 Minimum System Requirements
13.2 Installation
13.3 Logging In
13.4 FLIR Client 12 Live Viewing Overview
13.5 Playback & Search
13.6 Remote Settings Menu — Configure DVR Settings with FLIR Client 12
13.7 Local Settings Menu — Set Download Location and File Type
15.1 Running Lorex Player 11
15.2 Lorex Player 11 Interface Overview
16.1 Removing the Hard Drive
16.2 Installing a Hard Drive
18.1 STEP 1: Connecting a Self-Powered Microphone
18.2 STEP 2: Configuring Audio Recording
19.1 STEP 1: Port Forwarding
19.2 STEP 2: Create a LOREX Account
19.3 STEP 3: Add Your Address
19.4 STEP 4: Activate Your Warranty
19.5 STEP 5: Sign Up for a DDNS Account
19.6 STEP 6: Enable DDNS on the DVR
19.7 STEP 7: Connect to the DVR’s DDNS Address
21.1 System
21.2 Inputs/Outputs
21.3 Display
21.4 Recording
21.5 Playback and Backup
21.6 Storage & Archive
21.7 Connectivity
21.8 General
21.9 Recording Resolution (Pixels) & Maximum Speed (FPS — Frames per second)
22.1 FCC/IC
22.2 CE
22.3 Modification
22.4 RoHS
22.5 ICES-003
Topic
4.9.1 Camera Installation Tips
7.5.1 Setting PTZ Presets
9.5.1 Using the Smart Search Menu
12.1.1 Copying Channel Settings to Another Channel
12.2.1 Changing a Camera’s On-Screen Display (OSD)
12.2.2 Adjusting Camera Image Color
12.2.3 Setting up Covert Recording
12.2.4 Camera Type
12.2.5 Changing the DVR’s Output Resolution
12.2.6 Adjusting Menu Transparency
12.2.7 Configuring Sequence Mode
12.2.8 Configuring Privacy Zone(s)
12.2.9 Configuring Recording Parameters
12.2.10 Setting the Recording Schedule
12.2.11 Configuring System Recording Quality (Mainstream and Substream)
12.2.12 Configuring Auto Capture
12.2.13 Setting a Picture Schedule for Auto Capture
12.2.14 Enabling Manual Capture
12.2.15 Configuring Basic Network Settings
12.2.16 Setting up Email Notifications
12.2.17 Setting an Email Schedule
12.2.18 Configuring DDNS Settings
12.2.19 Configuring RTSP Streaming (Advanced)
12.2.20 Configuring Motion Detection Settings
12.3.1 Search for Video Recordings
12.3.2 Search for Events
12.3.3 Search for Snapshots
12.4.1 Configuring Hard Drive Overwrite
12.4.2 Formatting the Hard Drive
12.4.3 Setting Up Hard Drive Mirroring (Advanced)
12.4.4 Configuring Hard Drive Groups (Advanced)
12.4.5 Configuring PTZ Cameras
12.5.1 Changing the Date and Time
12.5.2 Changing On-Screen Language
12.5.3 Configuring Menu Time-out Option
12.5.4 Changing Video Output — NTSC and PAL
12.5.5 Turning Front Panel LEDs ON/OFF
12.5.6 Configuring Daylight Savings Time (DST)
12.5.7 Configuring NTP
12.5.8 View System Information
12.5.9 View Channel Information
12.5.10 View Recording Information
12.5.11 Logs — Searching and Backing Up
12.5.12 Setting the Remote ID
12.6.1 Manual Firmware Upgrade
12.6.2 Restoring Default Settings
12.6.3 Exporting System Settings
12.6.4 Importing System Settings
12.6.5 Configuring System Warning Settings
12.6.6 Using Automatic Firmware Upgrade
13.4.1 Channel List
13.4.2 Color Controls
13.4.3 PTZ Controls
13.5.1 Search for Recordings
13.5.2 Playback Controls
13.5.3 Using Video Download
13.6.1 Copying Channel Settings to Another Channel
13.6.2 Changing a Camera’s On-Screen Display (OSD)
13.6.3 Setting up Covert Recording
13.6.4 Configuring Privacy Zone(s)
13.6.5 Configuring Recording Parameters
13.6.6 Setting the Recording Schedule
13.6.7 Configuring System Recording Quality (Mainstream and Substream)
13.6.8 Configuring Auto Capture
13.6.9 Enabling/Disabling Manual Capture
13.6.10 Setting a Picture Schedule for Auto Capture
13.6.11 Configuring Basic Network Settings
13.6.12 Setting up Email Notifications
13.6.13 Setting an Email Schedule
13.6.14 Configuring DDNS Settings
13.6.15 Configuring RTSP Streaming (Advanced)
13.6.16 Configuring Motion Detection Settings
13.6.17 Configuring Hard Drive Overwrite
13.6.18 Configuring PTZ Cameras
13.6.19 Changing the Date and Time
13.6.20 Configuring Menu Time-out Option
13.6.21 Configuring Daylight Savings Time (DST)
13.6.22 Configuring NTP
13.6.23 Managing Users, Passwords and Permissions
13.6.24 View System Information
13.6.25 View Channel Information
13.6.26 View Recording Information
13.6.27 Setting the Remote ID
13.6.28 Manual Firmware Upgrade
13.6.29 Restoring Default Settings
13.6.30 Configuring System Event Settings
15.2.1 About the Advanced Menu