12 Pairing Cameras

Your cameras should be paired to the recorder and ready to use out of the package. If a camera becomes unpaired, or if you have purchased a wire-free add-on camera (max. 6 cameras per system), follow the instructions below.

To pair cameras to your system using the Lorex Cirrus, see 12.1 Pairing Cameras with Lorex Cirrus .
To pair cameras to your system using the recorder interface, see 12.2 Pairing Cameras using the Recorder Interface .

12.1 Pairing Cameras with Lorex Cirrus

From Live view, tap any free channel you would like to pair a camera to (marked with a icon

icon.

Tap PAIR. A timer for 30 seconds appears.

Press and hold the pair button on the back of the camera for 3 seconds.

LWB4800 / LWB4900 Series	LWB5800 / LWB6800 Series

12.2 Pairing Cameras using the Recorder Interface

From the live viewing screen, click icon

> Settings > Camera Settings.

Select an unoccupied channel to pair the camera to.

Click Pair. A timer for 30 seconds appears.

Press and hold the pair button on the back of the camera for 3 seconds.

LWB4800 / LWB4900 Series	LWB5800 / LWB6800 Series

	Note
A “pairing successful” message should appear on screen. If you do not see this message, repeat the steps above.