Enter the RTSP address in the following format:
-
rtsp://<username>:<password>@<IP address>:<port>/cam/realmonitor?channel=<channelNo>&subtype=<typeNo>
-
<username>: The user name of the system (default: admin).
-
<password>: Your new, secure password.
-
<IP address>: The IP address of the system.
|
Note
|
In order to view the RTSP stream over the Internet, you must port forward the RTSP port (default: 554) on your router to the system’s IP address.
|
-
<Port>: The RTSP port (default: 554) of the system.
-
<channelNo>: The number of the channel you would like to stream from.
-
<typeNo>: Enter 1 for the Sub Stream of the camera or 0 for the Main Stream. It is recommended to use the Sub Stream if connecting over the Internet.
The example below shows the correct format to connect to the Sub Stream on channel 1.