11 Pairing Cameras
Your cameras should be paired to the recorder and ready to use out of the package. If a camera becomes unpaired, or if you
have purchased a wire-free add-on camera (max. 8 cameras per system), follow the instructions below.
11.1 Pairing Cameras with Lorex Cirrus
-
From the Home screen, select your recorder from the list of devices.
-
Tap any free channel marked with a
icon.
-
Tap Pair. A timer for 30 seconds appears.
-
Press and hold the pairing button on the back of the camera until the red LED lights at the front of the camera stop flashing,
then release the pairing button.
|
Note
|
A “Pairing success!” message will appear on screen. If you do not see this message, repeat the steps above.
|
11.2 Pairing Cameras using the Recorder Interface
-
From the Live View screen:
|
Note
|
You will have 30 seconds to pair the camera.
|
-
Press and hold the pairing button on the back of the camera until the red LED lights stop flashing, then release the pairing
button.
|
Note
|
A “Pairing success!” message will appear on screen. If you do not see this message, repeat the steps above.
|