4  Rear Panel (NR900X Series‎)

NR9082X (8-channel)
Graphic
  1. Power input: Connect the included AC power cable.
  2. On / Off switch: Turns the NVR on or off.
  3. PoE Ports: Connect IP cameras. Integrated PoE (Power Over Ethernet) ports provide power to cameras and video connection to NVR.
  4. LAN: Connect a CAT 5 RJ45 Ethernet cable for local and remote connectivity.
  5. VGA: Connect a VGA monitor (not included) to view the system interface.
  6. Audio IN/Audio OUT: Service only; not supported.
  7. HDMI: Connect to an HDMI monitor or TV (not included) to view the system interface.
  8. RS232: Service only; not supported.
  9. USB port: Connect a USB mouse (included) or connect a USB thumb drive (not included) for data backup or firmware upgrades.
  10. Alarm block: Connect alarm/sensor devices (not included).
NR9163X (16–channel) / NR9326X (32–channel)
Graphic
  1. Power input: Connect the included AC power cable.
  2. On / Off switch: Turns the NVR on or off.
  3. PoE Ports: Connect IP cameras. Integrated PoE (Power Over Ethernet) ports provide power to cameras and video connection to NVR.
  4. Alarm block: Connect alarm/sensor devices (not included).
  5. HDMI: Connect to an HDMI monitor or TV (not included) to view the system interface.
  6. VGA: Connect a VGA monitor (not included) to view the system interface.
  7. USB port: Connect a USB mouse (included) or connect a USB thumb drive (not included) for data backup or firmware upgrades.
  8. RS232: Service only; not supported.
  9. LAN: Connect a CAT 5 RJ45 Ethernet cable for local and remote connectivity.
  10. Audio IN/Audio OUT: Service only; not supported.