Downloads / Upgrades Available: Click here
A: If the BNC cable connection to the DVR is too tight, it may cause strip lines or a shaking effect in the image.
Example of strip lines
To correct this, make sure to include some slack in the BNC cable when connecting the cameras to your DVR.
If the issue persists, try the following:
A: You must install ActiveX plugins to connect to the DVR on PC using Internet Explorer. After entering your DVR's IP or DDNS address in the address bar, follow the prompts to install the ActiveX plugins.
If you are still having difficulty connecting using Internet Explorer, it is recommended to use the Client Software provided on the CD or in the downloads tab for the LHD100 Series. See the following question for instructions on using the Client Software for PC.
A: Follow the steps below to connect to the DVR on PC using Client Software.
NOTE: To connect to your DVR over the Internet, you must port forward ports 80 and 3000 on your router to your DVR's IP address and register your DVR for Lorex DDNS.
To connect to the DVR on PC using Client Software:
A: A Client Software is available to view your cameras on Mac. See this FAQ for instructions on how to install the Client Software and connect to your DVR on Mac.
A: From Live View, click PLAY to open Playback mode. See the Instruction Manual for instructions on navigating playback mode and advanced playback options.
A: The default user name for the system is admin and the default password is 000000. By default, passwords are disabled and are not required to access local system menus or to log into the system remotely (i.e. over the Internet or a LAN) using a PC or Mac.
NOTE: The system password is required to log into the system remotely using a smartphone or tablet even when passwords are disabled.
It is essential to enable passwords on your system and create your own passwords to ensure that unauthorized people cannot gain access to your system. See below for details on enabling passwords and changing the default password.
To enable passwords and change the default password:
Last Updated: 8/29/2013