Buy Online or Call 1-888-425-6739 | 8:30 AM - 7 PM EST | 7 Days a Week

CARE 'N' SHARE Video Baby Monitor - Frequently Asked Questions

Relevant Models / Series: BB4321T, BB3521, BB3525PK22B, BB3525, LB311, LB315, LB321

Click here for downloads

Q: Is this product compatible with the WiFi cradle for remote viewing?

A: An error in an earlier version of the printed materials for this product series listed ACCWIFI1 as an optional add-on accessory. This accessory is not available. Unless a WiFi cradle was provided with your product, it is not capable of remote viewing. If you require remote viewing for your baby monitor, it is recommended to purchase a system that includes a WiFi cradle, such as BB4325X.

Q: How do I pair cameras?

A: The camera(s) included have already been paired with the monitor. If you have purchased additional add-on cameras (model# BB311AC1 / BB351AC1), OR if your monitor and camera are not paired up, follow the steps below.

To pair a camera to your monitor:

  1. Place the camera and monitor next to each other. Make sure the camera is turned on and plugged in.
  2. Press , then move the joystick left or right to select Setup.

  3. Select Pairing.

  4. Use the joystick to select the channel you would like to pair the camera to.

    NOTE: If a camera is already connected to this channel, the new camera will replace the existing camera.
  5. Press the PAIR button on the back of the fixed camera or the bottom of the P/T camera within 30 seconds of selecting the pairing channel.

    Location of pairing button on fixed camera Location of pairing button on P/T camera

    Live video from the camera is immediately shown on the monitor once the camera is successfully paired.


  • Immediately move the camera away from the monitor to avoid speaker feedback.
  • The monitor can connect up to 4 cameras.
  • The monitor can be used with a combination of fixed and P/T cameras.


Q: The battery in my LCD monitor is not holding charge or is showing signs of expansion. What do I do?

A: Some 4.3 inch models (BB4321T) may have one of the following issues with the rechargeable battery in the LCD monitor.

  • Battery not functioning or holding any charge.
  • Battery life is reduced. Normal battery life is 4 hours.
  • Battery is showing signs of expansion. This is not dangerous due to safety features designed in the battery, but it should still be replaced.

If your system has one of these issues, contact Lorex customer service for a replacement.

Once you get your new LCD monitor, make sure to follow the proper maintenance steps for rechargeable batteries. If the product is not in use for an extended period of time, disconnect the battery or make sure to charge it at least once every 6 months.

Last Updated: 4/25/2014