A: The system allows remote connectivity to your cameras in the following way:
A: If you want to change the existing password, this is done using the Lorex SD Pro app. Click here for instructions on changing your password with an iOS™ device, or click here for changing your password with an Android™ device.
If you have forgotten your password, you can reset the password (default: 000000) using the monitor.To change the remote access password on iOS:
A: You must reset the default password in order to access your system.To reset the default password:
A: The system allows you to set a schedule for recording video. During the scheduled recording time, you can set the system to record video continuously or only when motion is detected.
To configure a recording schedule:
NOTE: The system time uses a 24-hour clock.
A: This Lorex system uses dual motion detection technology. This helps to ensure the accuracy of the motion detection and minimizes false alarms. The cameras have built-in PIR sensor that tracks heat from body movements to detect movement up to a maximum range of 21 feet (6.5m). PIR motion detection is extremely accurate at detecting movements from people and animals, but the accuracy decreases in extremely hot environments approaching or exceeding human body temperature (98.6°F / 37°C).
The system also uses video motion detection, which looks for changes in video images (frames) to detect motion. Video motion detection allows for motion detection beyond the range of the PIR sensors and in extremely hot temperatures. Video motion detection is highly accurate, but may trigger recording from changes in light or moving trees, leaves, etc. You can set the sensitivity of video motion detection depending on your preferences
This system supports motion pre-recording, meaning that your motion recordings will feature up to 5 seconds of video before motion was detected. This means that even quickly moving objects will be included in the recording.
A: No, this type of installation will affect the performance of the camera in the following ways:
If you wish to monitor an outdoor area, the camera should be installed outdoors.
A: To listen to audio from the cameras, you must peel off the plastic film on the front of the cameras. Otherwise, it will block the built-in microphone.
Then, during live viewing, use the volume (+ / -) buttons on the video monitor to change the volume for audio. Use the yellow volume bars on the on-screen display to help you set the audio volume.
NOTE: The audio volume is different from the alert volume found in the Main Menu (Main Menu > Alert).
A: If you have purchased additional accessory cameras (model: LW2960HAC1), you will need to pair them to the video monitor. When pairing cameras, you can select the channel you would like the cameras to be assigned to. You can also use the steps below to reassign your existing cameras to different channels.
To pair an additional camera:
Last Updated: 7/15/2014