18 Recording Audio

The system supports up to 4 channels of audio recording. You must connect self-powered microphones (not included) to record with audio.

18.1 STEP 1: Connecting a Self-Powered Microphone

Only channels 1–4 can be set to record audio from a self-powered microphone. Connect the camera(s) that will be near the microphone(s) to channels 1–4.

Connect the microphone to one of the AUDIO INPUT (RCA) ports on the system. Match the AUDIO INPUT number with the VIDEO INPUT number of the camera you want to record audio on.

(OPTIONAL) Connect a speaker to the AUDIO OUTPUT (RCA) port on the system.

18.2 STEP 2: Configuring Audio Recording

Ensure that you enable audio for any channels that have a microphone connected to the corresponding AUDIO INPUT channel. See 12.2.11 Configuring System Recording Quality (Mainstream and Substream) for full instructions on enabling audio recording.

	Note
Audio recording without consent is illegal in certain jurisdictions. Lorex Corporation assumes no liability for use of its products that does not confirm with local laws.

	Note
If you are using an HDMI TV or monitor with speakers, the HDMI cable will output audio to the speakers on the monitor.