17  DDNS Setup (Advanced)

Setting up DDNS connectivity allows you to view your NVR from any computer or compatible mobile device with Internet access.

17.1  STEP 1: Port Forwarding

You must port forward the HTTP and Client ports (default: 80 and 9000) on your router to your NVR’s IP address before you can remotely connect to your system. There are several methods to port forward your router:
  • Use the Easy Connect Auto Port Forwarding Wizard (PC only) to port forward the required ports (see www.lorextechnology.com for details). For instructions on how to use the Easy Connect Wizard, see the Easy Connect manual on www.lorextechnology.com .
  • Manually port forward the required ports on your router to your NVR’s IP address by following your router manufacturer’s instructions. For more information on port forwarding, see the reference guides on www.lorextechnology.com .

17.2  STEP 2: Create a LOREX Account

Graphic

17.3  STEP 3: Add Your Address

Once you have a LOREX account, you must add your address to the account.
Adding an address is required for warranty activation, which is needed before you can sign up for a DDNS account.
To add your address to your LOREX account:
Graphic

17.4  STEP 4: Activate Your Warranty

Activate the manufacturer’s warranty on your NVR.
To activate your product warranty:
Graphic

17.5  STEP 5: Sign Up for a DDNS Account

Activate the manufacturer’s warranty on your NVR.
To sign up for a DDNS account:
Graphic

17.6  STEP 6: Enable DDNS on the NVR‎

For full instructions, see 12.2.20 Configuring DDNS Settings .

17.7  STEP 7: Connect to the NVR‎’s DDNS Address

Prerequisites:
To login using the DDNS address:
Graphic