12  Using the Main Menu

To open the Main Menu:

12.1  Main Menu Overview

Graphic

12.1.1  Copying Channel Settings to Another Channel

Many parts of the NVR menu allow you to customize settings for only one channel at a time. In these cases, you can use the Copy function to copy your settings for one channel to others or all channels of the NVR.
To copy channel settings to another channel:

12.2  Settings Menu

Configure options for display, recording parameters, network settings, and preferences for snapshots and motion detection.

12.2.1  Managing IP Cameras

Add, edit or remove IP cameras from your NVR system.
To manage IP cameras:
Graphic

12.2.1.1  Adding IP Cameras

Add IP cameras from the LAN to your NVR system. IP cameras connected directly to the NVR will appear in the IP Cameras menu automatically.
Prerequisites:
To add IP cameras:
  • Click icon next to an empty channel to search for and add an IP camera.
    OR
  • Click Manually Add to search for and add multiple IP cameras from the LAN at once. Click Search, then check boxes next to the cameras you would like to add, then click Add Selected.
    Graphic

12.2.1.2  Editing IP Cameras

To edit IP cameras:
  • Click icon to edit a connected IP camera.
  • The camera attributes appear:
    Graphic
  • Make edits as needed, then click OK.

12.2.1.3  Deleting IP Cameras

To delete IP cameras:
  • Click Graphic to delete a connected IP camera.

12.2.2  Changing a Camera’s On-Screen Display (OSD)

By default, the channel name, date and time are shown overtop of your video recordings.
To change a camera’s OSD:
Graphic

12.2.3  Adjusting Date & Time Format for Cameras

Adjust the appearance of date and time stamps for one IP camera at a time. You can also adjust the format of the system date and time to apply your changes to all connected cameras. For details on adjusting system date and time format, see 12.5.1 Changing the Date and Time .
To adjust camera date and time format:
Graphic

12.2.4  Adjusting Camera Image Color

Adjust hue, brightness, contrast and saturation of a camera’s image.
To adjust image color:
Graphic

12.2.5  Setting up Covert Recording

Covert recording allows you to hide channels from the live view of the NVR while continuing to record video. You will also be able to see covert channels when viewing remotely using a computer or mobile app.
To enable Covert recording:
Graphic

12.2.6  Changing the NVR‎’s Output Resolution

To optimize display, you can change the output resolution of your NVR to match the maximum supported resolution of your monitor.
To change the NVR’s output resolution:
Graphic

12.2.7  Adjusting Menu Transparency

You can increase or decrease the transparency of the on-screen menus and the Taskbar.
To adjust the transparency of on-screen menus:
Graphic

12.2.8  Configuring Sequence Mode

When Sequence Mode is enabled, the NVR cycles through connected cameras to show during live viewing. You can configure the NVR to cycle through one channel at a time or show a group of channels in one screen, as well as how long each channel or group is shown on screen before changing over.
To enable Sequence Mode:
  • Click icon on the Taskbar.
    OR
  • Right-click in live viewing to open the Quick Menu, then click Start SEQ.
To configure Sequence Mode:
Graphic

12.2.9  Configuring Camera Settings

Configure advanced settings related to camera picture quality.
To configure camera settings:
Graphic

12.2.10  Configuring Privacy Zone(s)

A privacy zone blocks out a portion of the camera image with a black box, letting you have privacy in certain parts of a camera image. You can configure up to 4 privacy zones per channel.
To configure privacy zone(s):
Graphic

12.2.11  Configuring Recording Parameters

Configure basic video recording options.
To configure recording parameters:
Graphic

12.2.12  Setting the Recording Schedule

The recording schedule determines the time periods that the system will record video during. You can set separate schedules for continuous and motion recording within the same channel.
To set a recording schedule:
Graphic

12.2.13  Configuring System Recording Quality (Mainstream and Substream)

The system uses 2 recording streams: the Mainstream is the high-quality stream used for live viewing and recording, while the Substream is a lower quality stream used for remote viewing and playback. This allows you to record high-quality video locally, as well as review video remotely with relatively low bandwidth requirements.
NVR units also support a Mobilestream, which you can enable to set a custom video stream for remote viewing purposes.

12.2.13.1  Configuring the Mainstream

Graphic

12.2.13.2  Configuring the Substream

Graphic

12.2.13.3  Configuring the Mobilestream

Graphic

12.2.14  Configuring Auto Capture

You can use Auto Capture to automatically capture snapshots of a camera image at repeating intervals throughout the day or during motion events. Auto Capture can help to conserve hard drive space during times when video recording is not required. By default, Auto Capture is disabled.
To configure Auto Capture:
Graphic

12.2.15  Setting a Picture Schedule for Auto Capture

The picture schedule determines the time periods that the system will use Auto Capture during. You can set separate schedules for continuous and motion snapshots within the same channel.
Prerequisites:
  • You must have enabled Auto Capture on the selected channel for the picture schedule to take effect. See 12.2.14 Configuring Auto Capture for details on enabling and configuring Auto Capture.
To set a picture schedule:
Graphic

12.2.16  Enabling Manual Capture

Manual Capture allows you to quickly take snapshots from enabled channels.
To enable Manual Capture:
Graphic

12.2.17  Configuring Basic Network Settings

The basic network menu allows you to change port numbers if needed and configure the network protocol type (DHCP or static).
To configure basic network settings:
Graphic

12.2.18  Setting up Email Notifications

You can configure the system to send email notifications about important activity from your security system. To have the option of using Lorex’s free email server (recommended) or using a different one.

12.2.18.1  Email Notifications — Using the Lorex server (recommended)

Graphic

12.2.18.2  Email Notifications — Using your own server information

Graphic

12.2.19  Setting an Email Schedule

The email schedule determines the time periods that the system will send out email notifications. You can set separate schedules for motion events and system warnings per channel.
Prerequisites:
To set an email schedule:
Graphic

12.2.20  Configuring DDNS Settings

The primary connectivity option for this NVR uses FLIR Cloud Services to connect to your system over the Internet without requiring port forwarding or DDNS registration.
Lorex DDNS is available as an optional connectivity option. See 17 DDNS Setup (Advanced) for details.
Prerequisites:
To configure DDNS settings:
Graphic

12.2.21  Configuring Switch Settings (Advanced)

You can configure the networking settings for the internal PoE switch.
To configure switch settings:
Graphic

12.2.22  Configuring RTSP Streaming (Advanced)

RTSP streaming allows you to stream video from a specific camera using a web address. It is an optional connectivity method used by 3rd party software applications.
To connect to the video stream using VLC Media Player:
Graphic

12.2.23  Configuring Motion Detection Settings

The system supports motion detection on any connected camera. You can determine the sensitivity as well as the active area for motion detection per channel.
To enable and configure motion detection:
Graphic

12.2.24  Configuring Alarm Devices

You can connect alarm input devices such as motion sensors (not included) or glass break detectors (not included) to the system. The system can be set to trigger recording or take other actions when these devices are activated.
To configure alarm input devices:
Graphic

12.3  Search Menu

Search for and play back recordings. The Search menu also allows you to search for events and snapshots, which you can backup to a USB flash drive (not included). For details on searching and backing up events and snapshots, see 10 Search & Backup .

12.3.1  Search for Video Recordings

To search for video recordings:
Graphic

12.3.2  Search for Events

Under Search, click Events to open the event search menu. For full instructions on searching for and backing up events to a USB flash drive (not included), see 10 Search & Backup .

12.3.3  Search for Snapshots

Under Search, click Picture to open the snapshot search menu. For full instructions on searching for and backing up snapshots to a USB flash drive (not included), see 10 Search & Backup .

12.4  Device Menu

Configure hard drive and PTZ camera options.

12.4.1  Configuring Hard Drive Overwrite

By default, the hard drive in your NVR is set to overwrite automatically, meaning that the system deletes the oldest footage when the hard drive is full to make way for new recordings. You can also select a number of days or hours the system should retain data for. For example, if you select 30 days, the hard drive will only overwrite recordings that are at least 30 days old.
To configure hard drive overwrite:
Graphic

12.4.2  Formatting the Hard Drive

Formatting the hard drive deletes all saved files from the hard drive. It is recommended to format any newly-installed hard drives before recording.
To format the hard drive:
Graphic

12.4.3  Enabling eSATA Recording

Enable eSATA recording to use external hard drives for recording video.
To enable eSATA recording:
Graphic

12.4.4  Setting Up Hard Drive Mirroring (Advanced)

A mirror hard drive can be used to automatically backup video footage on the recording (read-write) hard drive. When a mirroring hard drive is installed, the system can be set to record cameras in parallel to both the recording hard drive and the mirror hard drive in case of hard drive failure.
To set up hard drive mirroring:

12.4.5  Configuring Hard Drive Groups (Advanced)

Hard drive groups allow you to balance recordings across multiple hard drives. For example, you can record channels 1~4 to one hard drive and 4~8 to a second hard drive. This can reduce the amount of wear on the hard drives and may extend the life of the hard drives.
To configure hard drive groups:
Graphic

12.5  System Menu

Change general system information such as date, time and region, edit passwords and permissions, and more.

12.5.1  Changing the Date and Time

If you need to change the date and time after completing the setup wizard, follow the steps below.
To change the NVR’s date and time:
Graphic

12.5.2  Changing On-Screen Language

Change the language of on-screen text for the NVR.
To change language:
Graphic

12.5.3  Configuring Menu Time-out Option

By default, system menus are set to time-out after a set time period, taking you back to the main menu if there is no activity.
To configure or disable menu time-out:
Graphic

12.5.4  Changing Video Output — NTSC and PAL

Manually switch between NTSC and PAL video output.
To change the video output:
Graphic

12.5.5  Turning Front Panel LEDs ON/OFF

Turn LEDs on the front panel of the NVR on or off.
To turn front panel LEDs on/off:
Graphic

12.5.6  Configuring Daylight Savings Time (DST)

Customize settings for Daylight Savings Time (DST) based on your region or preference.
To configure Daylight Savings Time:
Graphic

12.5.7  Configuring NTP

Network Time Protocol (NTP) allows the NVR to sync with an NTP time server to ensure that system time is always accurate.
Prerequisites:
  • The NVR must be connected to a router or switch on your network using the included Ethernet cable. A constant connection to the Internet is required to use NTP.
To configure NTP:
Graphic

12.5.8  View System Information

View system information such as device ID, IP address, MAC address, model number, firmware version and more.
To view system information:
Graphic

12.5.9  View Channel Information

View channel information for each connected camera such as alias, mainstream and substream recording specifications.
To view channel information:
Graphic

12.5.10  View Recording Information

View recording information for each connected camera such as bitrate, recording resolution and frames per second (FPS).
To view recording information:
Graphic

12.5.11  Logs — Searching and Backing Up

The system log shows you important system events, such as motion alarms and system warnings. You can easily create a backup file of the system log for a set time period to a USB flash drive (not included).
Prerequisites:
  • To back up system log events, you must connect a USB flash drive to one of the NVR’s USB ports.
To search and back up the system log:
Graphic

12.5.12  Setting the Remote ID

If you have more than one DVR, you can use the ID function to pair the included remote control to a specific NVR.
To set the remote ID:
Graphic

12.6  Advanced Menu

Perform firmware upgrades, manage system events and warnings, load default settings, and save/load current system settings.

12.6.1  Manual Firmware Upgrade

The system supports automatic firmware upgrades over the network to ensure your unit is always up-to-date. It is recommended to always use automatic upgrade unless directed to perform a manual upgrade by technical support. For details on automatic firmware upgrades, see 12.6.8 Using Automatic Firmware Upgrade .
Prerequisites:
  • Save the .bin firmware upgrade file in the root folder of a USB flash drive (not included), and connect the drive to one of the USB ports on your NVR.
To manually upgrade the NVR’s firmware:
Graphic

12.6.2  Restoring Default Settings

Reset the NVR settings to their out-of-box state. You can choose to reset all settings at once, or just settings on specific menus. Restoring default settings will not delete recordings and snapshots saved to the hard drive.
To restore default settings:
Graphic

12.6.3  Exporting System Settings

You can export the main menu settings you have configured to a USB flash drive (not included). Exporting system settings lets you to quickly apply your settings to another NVR.
Prerequisites:
  • You must connect a USB flash drive to one of the NVR’s USB ports..
To export system settings:
Graphic

12.6.4  Importing System Settings

Once you have created a system settings export (see 12.6.3 Exporting System Settings for details), you can import the settings on another NVR.
Prerequisites:
  • You must connect a USB flash drive to one of the NVR’s USB ports.
  • The connected USB flash drive must have a system settings file saved on it. See 12.6.3 Exporting System Settings for full instructions on saving settings to a USB flash drive.
To import system settings:
Graphic

12.6.5  Upgrading IP Camera Firmware

Manually upgrade IP camera firmware. Typically, this will not be required unless directed to do so by technical support.
To manually upgrade camera firmware:
Graphic

12.6.6  Restoring Default IP Camera Settings

Restore default settings for IP cameras.
To restore default camera settings:
Graphic

12.6.7  Configuring System Warning Settings

Set preferences for system warnings including video loss, hard drive errors, and warnings when the hard drive is full.
To configure system warning settings:
Graphic

12.6.8  Using Automatic Firmware Upgrade

The system supports automatic firmware upgrades when connected to a router or switch on your network using the included Ethernet cable. When a new firmware version becomes available, the system is set to automatically download the firmware file from the Internet and displays a pop-up on the NVR’s on-screen display.
If your NVR has been disconnected from the Internet for a while, you can push the system to check for any firmware upgrades it may have missed.
Prerequisites:
  • Your NVR must be connected to your router or a switch on your network using the included Ethernet cable so the system can access the Internet.
To check for new firmware:
Graphic